Wi-Fi Repeater Admin Setup Easy Guide 

Have trouble with your Wi-Fi connection? Try setting up the wifi repeater for your home network that helps you to extend the range of Wi-Fi signals to different corners. With a Wi-Fi repeater admin setup, you do not need to worry about losing connection by stepping outside your room with your smartphone or laptop. The repeater comes in a compatible size that makes it a perfect fit for home and office use taking the least space possible. So, if the poor connectivity range is hampering your online experience, proceed with the Wi-Fi repeater admin setup guide below and set up your repeater with easy steps.

Configure your Wi-fi repeater with web GUI

Proceed with the steps below to set up your Wi-fi repeater for the network.

  • The first and foremost thing is to plug in your repeater to the power outlet.

  • When the device is connected to a power connection, the power LED will turn green, and the Wi-Fi light will begin to blink.

  • In the next step, you have to connect your repeater to the smartphone or computer. You can do this either using the ethernet cable or Wi-Fi connection.

  • If you’re choosing the Wi-Fi connection, you need to open the repeater list on your device and look for your wireless network name to get connected.

  • If you go for the Ethernet connection, you need to connect the ethernet cable from the repeater to your device.

  • Once you have successfully connected the repeater to your computer or smartphone, you can proceed with the web-based Wi-fi repeater setup Wizard instructions to complete the setup process.

  • Now, open any web browser on your respective device. In the URL bar,  type 192.168. 10.1/login/admin and hit the enter button to submit.

  • Now, open any web browser on your respective device. In the URL bar,  type 192.168. 10.1/login/admin and hit the enter button to submit.

  • Once you click on the enter button, you will be directed towards a repeater admin setup the login page. Here, you need to type the default username and password for your Wi-fi repeater.

  • The default username and password is ” admin”. In case the login error shows up on the screen, refer to the user manual to check the repeater username and password for first-time login.

  • After entering the details, click on the submit button.

  • On the next screen under the Wi-Fi repeater Setup Wizard option, you need to choose between the repeater mode and mode.

  • The device will now start scanning for the list of available Wi-Fi networks and display it on your screen.

  • From the result list, select your Wi-Fi router.

  • Enter the router password to get connected.

  • Click on the apply button to complete the Wi-Fi repeater admin setup process. Once you hit the button, it will take around 60 seconds to make the changes.

  • After this, you can connect the devices with a repeater network shown in your Wi-Fi list.

So these are some simple steps that can help you to set up the wifi repeater using the Wi-Fi repeater setup without instructions. Just make sure that you enter the correct IP address username and password details to get connected.

Set up to wifi repeater using WPS method

If you want to complete the setup process quickly you can also use the WPS method to get connected. Below we have shared the step-by-step guidelines to complete the  Wi-Fi repeater admin setup using the WPS method.

  • To set up the repeater, you need to make sure that both the repeater and router are present when in the same room or in the range of  8 to 10 feet.

  • Now, plug in your repeater to the electric outlet and wait until the power lights get stable.

  • Press the WPS button on your router, the WPS button may present in the back or the front of the router depending upon the model you are using.

  • Now within 2 minutes, you need to press the WPS button on your repeater for the Wi-Fi repeater admin setup. The WPS light on both devices will begin to blink.

  • The process usually takes 20 to 30 seconds for the configuration of a wireless repeater using the WPS method.

  • Once the WPS light on the repeater turns solid, you can see the network name appearing on your Wi-Fi list.

  • The device will pick the same network to pick the router’s name, and the password will also be the same as your router.

  • If you have a doubt, you can use the Wi-Fi repeater manual to get the detailed instructions.

So these are some simple steps that can help you with Wi-Fi repeater admin setup for your device quickly. The wifi repeater will help you to resolve the Wi-Fi connectivity issues and boost the wireless signals so they can reach every corner of your home. Now, you can easily access the high-speed internet even in the dead zone area. Just make sure that you follow the guidelines carefully and enter the correct details to avoid any mistake in the Wi-fi repeater admin setup process. Once the setup is complete, connect your devices to the internet and start using the service.

Privacy Settings
We use cookies to enhance your experience while using our website. If you are using our Services via a browser you can restrict, block or remove cookies through your web browser settings. We also use content and scripts from third parties that may use tracking technologies. You can selectively provide your consent below to allow such third party embeds. For complete information about the cookies we use, data we collect and how we process them, please check our Privacy Policy
Youtube
Consent to display content from Youtube
Vimeo
Consent to display content from Vimeo
Google Maps
Consent to display content from Google